A Router with three ethernet ports and two telephone sockets.
device allows you to use two standard telephones for VOIP (Voice over
IP) and connect other computer peripherals to share your internet
connection. With freespeech you can configure the two telephone lines
on same account (same phone number), so if one phone is busy the other
phone will ring also you can make calls on one line while the other is
busy - nice. You may also configure line 1 and line 2 for separate
An example setup for this device
Computers and 2 phones sharing the same internet connection. The phones
used are standard analogue telephones (same as you would use with
eircom), all the calls are routed via VOIP (Voice Over IP).
Please refer to user manual for full details connecting your phones and configuring the router.
default url to log onto the router is http://192.168.15.1/Voice_Setup.htm
default username:admin, default password:admin
Configure the STUN server
You will normally only need to use a STUN server if you are configuring this behind another router.
if you are using wireless broadband or cable STUN is normally OFF, if
you are using DSL and you do not have your dsl modem in bridged mode
STUN is ON (if you had to configure PPPoE settings on the RT31P2 then
your DSL modem is in bridged mode). If you are still unsure turn STUN
Select menu: Voice > System and enter stun.freespeech.co.uk
Select menu: Voice > Line1
Use your freespeech number for User id and Authentication User Name. Authentication password is the password you chose when you subscribed to the service. Registration/Proxy Server is freespeech.co.uk
Nat Traversal Settings
If you are using a public IP address or not using STUN select NONE
If you are using STUN select STUN.
Supplimentary Service Settings
These can be set as you wish but if you have two lines using the same account you should turn call waiting OFF
Voice Quality Settings
We recommend G729. This should allow you to have two conversations t once on your broadband link without any loss in quality.
Don't forget to click Save Settings
Configuring line 2
you like you can configure the second line with the same account OR a
different account with a different provider. If you confiure both line
with freespeech the two line will ring in parallel, answer one and the
other will stop ringing. You are free now to make/receive calls on the
Select menu: Voice > Line2 and follow the steps for configuring line 1.
Check you are online
Select menu: Status > Voice
The status should be online. Note also at the front of the router the lights for phone line 1 and 2 should be on (they will flash if the phone is off-hook).
You should now be ready to make calls. List up your handset and dial 1742 to make an echo test.
Please post comments if you have any