An IP phone which supports connecting up to 4 VOIP accounts (can be with any provider)
WITH THE LATEST FIRMWARE (1.1.0.16 July 2006) THE LCD MENU SYSTEM ON THIS PHONE IS MUCH IMPROVED. IT CAN NOW ALSO BE CONFIGURED AS A ROUTER.
This
device plugs directly into your broadband router using a LAN style
connector (it does not plug into a normal telephone socket). Up to four
VOIP (SIP)
accounts are supported, this means you can register with up to four
different VOIP providers. This phone also supports multiple line
appearances on each account, this means your line will not be busy if
call comes in (even if it's on the same account). It also supports
feaures like call transfer, conference, call hold etc.. - refer to
owners manual for more.
An example setup for this device
This
is an example of a typical desk setup. A GXP-2000 connected to the
broadband router, the PC is connected via the phone (PC socket on
phone).
Note: This phone does not have a built in router, you need to have a separate router on your network.
Note: You need an external power supply for this phone, it is not supplied via the LAN cable.
Please refer to your manual for full details on connecting and installing your phone
Logging on
You
will need to connect to your phone using a web-browser. To do this you
will need to know the phones IP address, you can check this using the
LCD phone display.
Press the round button to bring up the phone menu, then down arrow until you see the option [3] IP address, press the round button again and your IP address will be displayed.
Enter the ip address in your web browser example: http://192.168.0.200
You should see a screen that looks something like this
Enter your phone password. (default is admin)
Setting up STUN
STUN
is used in some cases to get round problems with routers. It's no harm
to set it up, you can try it OFF/ON and see which suits you best.
choose ADVANCED SETTINGS from the main menu and set the stun server to stun.freespeech.co.uk
See next section for turning STUN ON/OFF.
Don't forget to click 'update' when you have completed your changes or they will be lost.
Configure your Account
Choose the ACCOUNT (line) you wish to configure from the main menu and fill in the highlighted fields.
Note:
Even if you only have one account configured, because your phone
supports multiple line appearances, you will be able to place a call on
hold by pressing another line then dialing as normal.
Don't forget to click 'update' when you have completed your changes or they will be lost.
After you have configured all setting click reboot to activate your changes.
Checking you are online
To check you are online you can log into your phone again and choose STATUS from the main menu.
If your account is online you will see 'Registered: Account X: Yes' for the account you configured.
Note:
You should also notice when you select the 'LINE' buttons on your phone
it will indicate if the account is not registered on the LCD display.
Note: You can also see in this example STUN is working as the type of NAT is detected as symmetric.
To make a test call dial the echo test on 1742